Scaling up "Nano" Li4Ti5O12 for High-Power Lithium-Ion Anodes Using Large Scale Flame Spray Pyrolysis

Herein, we present the upscaled synthesis of nanoparticulate Li4Ti5O12 (LTO) by means of flame spray pyrolysis (FSP), yielding high phase purity and appropriate morphology for application as high-power lithium-ion anode material. Electrodes based on this optimized LTO nanopowder, carboxymethyl cellulose (CMC) as binder, and copper as current collector revealed excellent rate performance, providing specific capacities of 133, 131, 129, 127, 124, and 115 mAh g−1 when applying C rates of 1C, 2C, 5C, 10C, 20C, and 50C, respectively. Targeting the commercial application of thus synthesized nanoparticles, we optimized also the electrode composition, comparing three different binding agents (CMC, PVdF, and poly(acrylic acid), PAA) and substituting the copper current collector by aluminum. The results of this comparative analysis show, that the combination of nanoparticulate LTO, CMC, and an aluminum current collector appears most suitable toward the realization of environmentally friendly and cost-efficient lithium-ion anodes, presenting very stable cycling performance for more than 1000 cycles at 10C without substantial capacity decay. © The Author(s) 2015. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial No Derivatives 4.0 License (CC BY-NC-ND, http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial reuse, distribution, and reproduction in any medium, provided the original work is not changed in any way and is properly cited. For permission for commercial reuse, please email: oa@electrochem.org. [DOI: 10.1149/2.0711512jes] All rights reserved